Conettix D6600 Bedienungsanleitung PDF herunterladen (Seite 7)

Conettix D6600/D6100IPv6/D6100i | Computer Interface Manual | 2.0 Making the Right Connection

Bosch Security Systems, Inc. | 2012.09 | 4998122703-05

Figure 6: Modem Cable Pin Definitions

(Male DB9 on receiver)

1 - Data carrier detect (DCD)

2 - Receive (RX)

3 - Transmit (TX)

4 - Data terminal ready (DTR)

5 - Signal-ground (SIG-GND)

6 - Data set ready (DSR)

7 - Ready to send (RTS)

8 - Clear to send (CTS)

9 - Ring indicator (RI)

2.2 Selecting Program Options in the D6600/D6100IPv6/D6100i

Use the D6600/D6100IPv6/D6100i keypad or the D6200 Programming Software to program the

receivers. Below are the recommended selections for programming when connecting the receivers to

an automation system. Additional selections can be found in the D6600/D6100IPv6/D6100i Program

Entry Guide (P/N: 4998122702).

Table 1: Recommended Programming Selections

Receiver

Gateway

Number

Selects a number (01 to 99) that is included in every message to the computer in

both D6500 and SIA modes

Output

Format

Enable computer output messages in the selected format:

SIA computer interface standard format, recommended (expanded

reporting capabilities)

D6500 21-character format output

Baud Rate Use maximum speed supported by PC

Link Test Tests if a supervision signal can be sent and received from the central station by

the receiver

1 2 3 4 5 6 7 8 9 10 11 12 ... 184 185

Keine Kommentare

Conettix D6600 Bedienungsanleitung Seite 7