Conettix D6600 Bedienungsanleitung PDF herunterladen

Intrusion Alarm Systems | Conettix D6600 Communications Receiver/Gateway

Conettix D6600 Communications

Receiver/Gateway

www.boschsecurity.com

u 32 lines for public switched telephone network

(PSTN) communications with Two Way audio, Caller

ID, ANI and DNIS support

u - Award winning VOIP compensation feature reduces

signal errors caused by digitally distorted Contact ID

signals

u - Up to 3200 network accounts for IPv6 and IPv4

network communications

u - Supports NIST-FIPS197 certified 128 to 256 bit

AES encryption

u - Designed with electrically isolated, hot-swappable

line cards and front panel access to CPU card

The Conettix D6600 Communications Receiver/

Gateway with Conettix IP hardware components works

in the following configurations:

• Telephone line communications over the public

switched telephone network (PSTN).

• Internet or intranet communications over a LAN or

WAN using standard user datagram protocol and

internet protocol (UDP/IP).

• Simultaneous PSTN and LAN or WAN

communications.

The Conettix network environment reduces signal-

reporting time, improves security, and provides instant

notification when a site experiences communication

problems. A D6600 with Conettix IP hardware is

compatible with most manufacturer’s fire and security

system control panels.

System overview

PSTN Communications Configuration

This configuration uses existing telephone lines. A

control panel's signal transmits over a PSTN analog

telephone line to the D6600. The D6600 translates the

signal to a common data format and sends the signal

through Ethernet LAN, WAN, or RS-232 to a central

station automation system.

Internet or Intranet Communications Configuration

This configuration requires Conettix IP hardware

components, uses existing Internet or intranet

structures, and avoids additional telephone service

costs.

This configuration permits the Conettix D6200

Programming/Administration Software to connect to

the D6600 remotely. A control panel's signal transmits

over the LAN or WAN to the D6600. The D6600

translates the signal to a common data format and

sends the signal through Ethernet LAN, WAN, or

RS-232 to a central station automation system. The

central automation system sends information to

operator workstations.

Conettix D6200 Programming/Administration

Software

Conettix D6200 Programming/Administration Software

is a PC-based application that allows users to view,

change, upload, and download D6600 programming

1 2 3 4 5 6

Inhaltsverzeichnis

Seite 1 - Receiver/Gateway

Intrusion Alarm Systems | Conettix D6600 Communications Receiver/GatewayConettix D6600 CommunicationsReceiver/Gateway www.boschsecurity.com

Seite 2

parameters through a network connection or RS-232serial port. Through the Conettix D6200 Programming/Administration Software users can edit CPU and li

Seite 3

• Each line card has four telephone lines.• Receives signals on up to 32 telephone linessimultaneously.• Independent, configurable communication forma

Seite 4

Network Communications and Control PanelsFor network communications, it is necessary to useone of following modules with the appropriate controlpanel:

Seite 5

Ordering informationConettix D6600 Communications Receiver/GatewaySupports communications through PSTN and/or LAN/WAN. Supports 32 telephone lines, 32

Seite 6

6 | Conettix D6600 Communications Receiver/GatewayRepresented by:Americas: Europe, Middle East, Africa: Asia-Pacific: China: America Latina:Bosch Secu